Advertisement
4-1. Setup Menu (BVP-500 series)
4-1-6. System Config Menu
Page
Ver.
Item
Others1
Filter,WHT MEM
NTSC ENC
Rotation
Own Call
Center MKR H
Center MKR V
Lens VTR S/S
VF ? Display
PinP RET RVS
4-18 (E)
Settings
Contents
[ON], OFF
Does not function in the unit. (The setting change becomes invalid.)
[Wide], Narrow
Sets the band width of the Q signal for the NTSC color encoder.
[STD], RVS
Selects the mode of MENU SELECT knob as turned clockwise.
STD : Cursor moves downwards and a numeric value increases.
RVS : Cursor moves upwards and a numeric value decreases.
R, F&R , Off
Selects whether TALLY lamps are lit corresponding to the
CALL button on rear panel pressed, or not. Or selects which TALLY
lamps are lit when the CALL button is pressed.
(This setting is valid in connection with CCU. When the standalone unit
is installed and MSU/RCP is not connected to the camera, it is always
set to OFF.)
R
: Red TALLY lamps of VF are lit.
R&F : Red TALLY lamps of VF and UP TALLY lamps of VF and camera are lit.
Off : No TALLY lamp is lit corresponding to the CALL button.
_20 to 20 ([XX])
Shifts horizontally the location of the center marker on the screen.
20 (right) ↔ _20 (left)
_20 to 20 ([XX])
Shifts vertically the location of the center marker on the screen.
20 (up) ↔ _20 (down)
Talk, [RET2]
Selects the mode of VTR S/S SW of the lens.
Talk : VTR S/S SW functions as INCOM TALK SW (momentary).
RET2 : VTR S/S SW functions as RET2 SW.
[On], Off
Turns on and off the indication of ? mark at the top-right of the VF
screen with the DISP switch set to ON when the self-diagnosis result is
NG (no good) and so on.
[RVS1], RVS 2, Off
Selects the indication mode of VF display in PinP mode.
Setting RET 1
RVS 1
RVS 2
OFF
* To output RET 3 video signal, press RET 1 and 2 switches at the same time.
Large screen
(or 2, 3) SW
ON
RET 1 (2, 3) video
OFF
Camera output
ON
RET 1 (2, 3) video
OFF
Camera output is displayed on the whole screen.
(Small screen is not displayed.)
ON
Camera output
OFF
Camera output is displayed on the whole screen.
(Small screen is not displayed.)
Small screen
Camera output
The last RET video selected
Camera output
RET 1 (2, 3) video
BKP-5090
Advertisement
