Advertisement
3-1-2. Paint Menu
The Paint menu is used for white and other paint adjustments items. To activate the Paint menu, first
display the TOP menu.
(Boxed items under "Settings" indicate the factory setting.)
Page
Ver.
Item
Video Level
White R/G/B
Black R/G/B/M
Flare R/G/B
Gamma R/G/B/M
BlkGam
R/G/B/M
Flare
Test
Clear
Detail 1
Detail
Level
Limitter
Crispening
Level DEP.
Level DEP.
FineDetail
FineDetail
Test
Clear
BKP-5090
Settings
Contents
–99 to 99 ([0])
Adjusts the R, G, B gain level.
–99 to 99 ([0])
Adjusts the R, G, B master black level.
–99 to 99 ([0])
Adjusts the R, G, B flare level.
–99 to 99 ([0])
Adjusts the R, G, B master gamma correction curve.
_99 to 99 ([0])
Adjusts the R,G,B and master black gamma to adjust the rising block of
the gamma correction curve
[On], Off
Turns the flare correction circuit on and off.
1, 2, [Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2
: Outputs 3-step waveform test signal
Off
: No test signal is output
Press MENU SEL
Sets all settings on the Video Level page to 0.
switch to execute.
(When you press MENU SEL switch, the "Clear" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
[On], Off
Turns the function on and off to improve resolution by adding the detail signal.
–99 to 99 ([0])
Adjusts the master level for the detail signal.
–99 to 99 ([0])
Adjusts the clipping level against the maximum detail level.
–99 to 99 ([0])
Adjusts the level at which the detail signal is crispened.
–99 to 99 ([0])
Adjusts the level to control the detail signal used at lower signal level.
[On], Off
Turns the level depend function on and off.
_99 to 99 ([0])
Adjusts the fine detail waveform in thickness
[On], Off
Turns the fine detail function on and off
1, 2, [Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2
: Outputs 3-step waveform test signal
Off
: No test signal is output
Press MENU SEL
Sets all settings on the Detail 1 page to 0.
switch to execute.
(When you press MENU SEL switch, the "Clear" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to
cancel.)
3-1. Setup Menu (BVP-550 series)
3-1-2. Paint Menu
3-7 (E)
Advertisement
