Siemens SINUMERIK Series Function Manual page 94

3 Setting up functions
3.1 Maintenance
Function
Comment
Delete values
after
Maximum
number of
values per
variable
Last
measurement
Triggered by control monitor
Control
monitor
Variables x – y of y
Variables
Edit variable
Time series
Name
Warning limit
3-94
Description
Individual text for the variable monitor.
Automatically deletes all values after the speci-
fied time.
The following units are available for the time
specification:
 Minutes
 Hours
 Days
 Weeks
In addition to a time limit for the number of
values, a quantitative limit can be entered. When
the maximum number of desired values has
been reached, the oldest values are deleted.
Thus the limit is observed.
Time stamp of last data acquisition.
Selection of a control monitor that is to trigger
the variable monitor.
Creation of a new control monitor that is to trig-
ger the variable monitor.
Table of the variables configured in the variable
monitor.
Change to a window to record and insert the
following variable:
 Predefined NC variables
or
 Freely definable variable of PLC, NC, S7, S5,
etc.
Note:
An appropriate OPC driver or GenTec adapter is
required for freely definable variables. For more
information, contact your Siemens sales
representative.
Displays the time series of the selected
variables.
Name of the variable.
Displays the configured values for the warning
limits.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
INPUT
(max. 200
characters,
all characters
are
permissible)
DISPLAY
SELECTION
INPUT
1 to 999,999
DISPLAY
INPUT
0 to
1,000,000
DISPLAY
DISPLAY
SELECTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
© Siemens AG 2012 All Rights Reserved
03/2012