Siemens SINUMERIK Series Function Manual page 151

03/2012
Fig. 3-42: Example - cyclic trigger on NC monitor
An interval value can be specified for each variable provided. As soon as the vari-
able value has exceeded the initiating value, the trigger is initiated and a new count
interval begins. The trigger value is incremented by the configured interval value. If
several counters are combined in one trigger, the first counter to exceed the inter-
val limit triggers the trigger. A new count interval then starts for all counters that are
combined in the trigger.
Function
View
Name
Axis
Status
Trigger
Interval
Remainder
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Name of the variable.
Axis identifier: NC axis name.
Counter status, corrected by ePS, for current
absolute variable content.
Current status for the next initiation, either speci-
fied by an entry or automatically calculated and
entered by ePS Network Services at interval
change
Interval value
Numerical and graphic display of the remaining
count units until next initiation
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 100
characters; all
characters are
permissible,
exception <)
DISPLAY
DISPLAY
DISPLAY
INPUT
(With ePS
Network
Services
update)
DISPLAY
INPUT
(Up to a max.
of 9 digits)
DISPLAY
3-151