Establishing A Connection And Diagnostics; Connecting The Machine - Siemens SINUMERIK Series Function Manual

03/2012

7 Establishing a connection and diagnostics

7.1 Connecting the machine

Description
To use the ePS Network Services on the control, the following steps must be per-
formed:
1. An administrator creates the machine with the associated master data on the
ePS Network Server.
2. It is then necessary to register the machine. The machine is then given an
identifier by the ePS Network Server that identifies it uniquely.
3. This machine will be connected with the ePS Network Server.
4. The alarm model can then be uploaded and the machine synchronized.
Operating sequence on the machine
Fig. 7-1: After logging on to the control
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
7 Establishing a connection and diagnostics
7.1 Connecting the machine
7
7-303