Siemens SINUMERIK Series Function Manual page 39

03/2012
Function
Filter time series
Variable monitors
and
Axis test types:
 Equability test
 Circularity test
 Universal axis test
Filtering
Show/hide filter areas
Displaying diagrams of the selected time series
If you click the "Display" text button under the time series selection tree, the graphs
for the selected time series are displayed.
Displaying the measurement results
You can view measurement results both on the machine operator panel and on the
PC. Trend curves produced by measurement series can only be viewed on the PC.
The warning and critical limits of the characteristics can give the machine operator
evaluation information about how far the qualitative state of the machine is from the
limit criterion.
Fig. 2-19: Examples of time series
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
2.2 Variable monitors – time series – measurements and measurement series
Description
This function opens the menu for the purpose of filtering
the measurement series displayed in the selection.
Measurement series can be filtered according to the
type of measurement series.
The "Filter" function causes the selected filter setting to
take effect.
This function shows or hides the entire filter area.
2 Machine Information
2-39