Executing/Closing A Maintenance Job (Control) - Siemens SINUMERIK Series Function Manual

03/2012

4.1.3 Executing/closing a maintenance job (control)

Function description
Maintenance personnel can view jobs in the ePS Network Services menu (Mainte-
nance services  Maintenance jobs) on the control, and can also open them from
here.
To limit the length of execution for maintenance procedures, there is the option of
protecting the maintenance job from entries and changes when it is opened. Third
parties will see that the maintenance procedure is already taking place and will be
acknowledged with the appropriate status. See also Section: Test series on the
machine
Function
Execute maintenance job
Condition monitor:
Performing axis tests
from the maintenance job
View maintenance job
The same maintenance job information is shown on both the user interface of the
control and the PC.
However, to facilitate handling, only the maintenance jobs of a machine are dis-
played that are soon due, are due and open.
To this effect, menu operation is limited: The jobs cannot be edited; but only ope-
ned and acknowledged, and comments can be added.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
The maintenance personnel can edit maintenance
jobs that are due:
 Open (block for third-party access)
 Add and change comments
 Acknowledge as correctly executed
 Acknowledge as incorrectly executed, if this is not
possible. It may be advisable to add a comment in
such cases.
The maintenance personnel can perform the axis
tests that are linked to the maintenance job via the
maintenance schedule.
The maintenance personnel can display the informa-
tion stored in the maintenance schedule (from which
the maintenance job was generated), such as work
instructions and attached files (drawings, extracts
from the machine documentation, etc.).
These documents must have been stored as PDF
documents during the planning in the maintenance
schedule or in the job.
4 Organizational tasks
4.1 Maintenance
4-223