Equability Test - Siemens SINUMERIK Series Function Manual

03/2012

3.2.2 Equability test

Parameter description
Parameters for conducting an equability test:
Function
Name
Channel
Axis
Start point
End point
Feed per
minute
Fig. 3-12: Equability test on the operator panel
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
3.2 Configuring measurements and measurement series
Description
Name of the measurement series (measure-
ments do not have a name).
Selection of the required channel. The channel
defines the possible machine axes in the "Axis"
selection list.
Selection from the possible machine axes that
can be programmed in the selected channel.
The axis position at which the first partial move-
ment of the measurement begins.
The axis position at which the first partial move-
ment of the measurement ends.
Velocity at which the axis is moved.
3 Setting up functions
Type
INPUT
SELECTION
SELECTION
INPUT
INPUT
INPUT
3-103