Description Of Display Machine Data - Siemens SINUMERIK 840D sl Commissioning Manual

11/2006
7.2.2

Description of display machine data

9014
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9020
MD number
Standard value: 1
Change becomes effective after: POWER ON
Data type: BYTE
Significance:
9422
MD number
Standard value: 1
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9428
MD number
Standard value: 100
Change becomes effective after: POWER ON
Data type: WORD
Significance:
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
$MM_USE_CHANNEL_DISPLA Y_DATA
Use channel–specific display machine data
Min. input limit: 0
Protection level: 3/4
In this MD you stipulate whether you want to use channel–specific display machine data.
0 = No channel–specific display machine data
1 = Channel–specific display machine data
Note: With ShopTurn this must be set to MD = 0.
$MM_TECHNOLOGY
Basic configuration turning/milling
Min. input limit: 0
Protection level: 3/4
In this MD you stipulate the basic configuration for simulation and free contour program-
ming.
0 = No specific configuration
1 = Turning machine configuration
2 = Milling machine configuration
$MM_MA_PRESET_MODE
Preset/basic offset in JOG
Min. input limit: 0
Protection level: 3/4
In this MD you stipulate the behavior of the function "Set zero offset" in "Machine – manual"
mode.
≠ 2: Zero point is saved in the currently active zero offset, in other cases it is saved in the
basic offset
= 2: Zero point is saved in basic offset
$MM_MA_SPIND_MAX_POWER
Maximum value of the spindle performance display
Min. input limit: 100
Protection level: 3/4
In this MD enter the factor by which the supplied spindle utilization will be multiplied.
7.2 Display machine data for ShopTurn
Max. input limit: 1
Valid as of software version:
ShopTurn 6.4
Max. input limit: 2
Valid as of software version:
ShopTurn 6.1
Max. input limit: 3
Valid as of software version
ShopTurn 6.4
Max. input limit: ***
Valid as of software version
ShopTurn 7.1
7 Machine Data
Units: –
Units: –
Units: –
Units: %
7-47