Siemens SINUMERIK 840D sl Commissioning Manual page 3

Preface
SINUMERIK
documentation
Target audience
Hotline
Internet address
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
The SINUMERIK documentation is subdivided into 3 parts:
S
General Documentation
S
User Documentation
S
Manufacturer/Service Documentation
More detailed information about other publications concerning SINUMERIK
840D sl and publications that apply to all SINUMERIK controls (e.g., Universal
Interface, Measuring Cycles, etc.) can be obtained from your local Siemens
branch office.
A monthly updated documentation overview with the available languages can
be found on the Internet under:
http://www.siemens.com/motioncontrol
Follow the menu items ––> "Support" ––> "Technical Documentation" ––> "Doc-
umentation Overview" .
The Internet edition of the DOConCD, the DOCon Web, can be found under:
http://www.automation.siemens.com/doconweb
This documentation is intended for manufacturers of single–carriage turning
machines using SINUMERIK 840D sl; it provides information needed for
configuring and commissioning ShopTurn.
If you have any questions, please contact the following hotline:
A&D Technical Support
If you have any queries (suggestions, corrections) in relation to this documenta-
tion, please fax or e–mail us:
E–mail: mailto:motioncontrol.docu@siemens.com
Fax: +49 (0) 9131 98–63315
For the fax form see the feedback form at the end of the documentation.
http://www.siemens.com/motioncontrol
Phone: +49 (0) 180 5050–222
Fax: +49 (0) 180 5050–223
Email: mailto:adsupport@siemens.com
http://www.siemens.com/automation/support–request
iii