Prerequisites - Siemens SINUMERIK 840D sl Commissioning Manual

4 Commissioning
4.1

Prerequisites

ShopTurn
on NCU (HMI
embedded)
ShopTurn
for PCU 50.3
4-18
The complete pre–installed software is located on the CompactFlash Card:
– Drive software (Sinamics)
– PLC software
– NCK software
– ShopTurn
– Cycles
The software is provided in 6 languages (German, English, French, Italian,
Spanish, and Chinese).
The CD contains the software in 6 languages (German, English, French, Italian,
Spanish, and Chinese).
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006