Defining Texts For The Magazine Locations On The Intermediate Buffer - Siemens SINUMERIK 840D sl Commissioning Manual

11/2006
Example
8.8.5

Defining texts for the magazine locations on the intermediate buffer

Example
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
[TPC1]
WIDTH = 2
TYPE = INTEGER
In this example, the input fields of the column OEM tool parameter 1 are 2 char-
acters wide. You can only enter integer values in the input fields.
The magazine locations of the buffer are shown, as standard using
symbols in the tool manager lists. You can
assign texts to the location using the configuration file to_turn.ini.
ID for the buffer:
BUFFER
In the section BUFFER, the magazine locations of the buffer are assigned texts.
Magazine location = Text–ID
Valid text IDs and information on defining texts are provided in Chapter 8.8.7
"Defining texts").
[BUFFER]
DEFAULT = 89768
1 = 89790
2 = 89791
3 = 89792
In this example, three magazine locations of the buffer (spindle, gripper 1 and
gripper 2) are assigned texts for the display in the tool manager lists. A default
text is displayed for additional magazine locations of the buffer.
8 Tool Management
8.8 Configuring the operator interface
8-119