Miscellaneous - Siemens SINUMERIK 840D sl Commissioning Manual

Miscellaneous

11.1 Machine data for protection levels
Lockable
data areas
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
The machine manufacturer or end user can set operator panel machine data to
assign the appropriate protection levels for individual functions and data areas
For a number of data types, it is possible to input different protection levels for
read and write access authority.
The machine data which can be locked by means of protection levels in
ShopTurn are listed below:
Operator panel machine data
9182 USER_CLASS_INCH_METRIC
9200 USER_CLASS_READ_TOA
9201 USER_CLASS_WRITE_TOA_GEO
9202 USER_CLASS_WRITE_TOA_WEAR
9203 USER_CLASS_WRITE_FINE
9206 USER_CLASS_WRITE_TOA_SUPVIS Change limit values for tool monitoring
9210 USER_CLASS_WRITE_ZOA
9215 USER_CLASS_WRITE_SEA
9216 USER_CLASS_READ_PROGRAM
9217 USER_CLASS_WRITE_PROGRAM
9218 USER_CLASS_SELECT_PROGRAM
9222 USER_CLASS_WRITE_RPA
9252 USER_CLASS_TM_SKTOOLLOAD
9253 USER_CLASS_TM_SKTOOLUNLOAD Enable unloading of a tool
9254 USER_CLASS_TM_SKTOOLMOVE
9258 USER_CLASS_TM_SKNCNEWTOOLE Enable setting up of new cutting edges
11
Access to
Switch over between Inch/metric
Read tool offsets
Write tool geometry
(including type and cutting edge)
Write tool wear (without limit value)
Write fine tool wear and
fine offsets
Write rough offsets
Write setting data
Read program
(protection level must be ≤ 6)
Write/edit program
(protection level must be ≤ 5)
Enable program selection
(protection level must be ≤ 7)
Write R parameters
Enable loading of a tool
Enable relocation of a tool
11-167