Start-Up In Nck; Enter The Nc Machine Data - Siemens SINUMERIK 840D sl Commissioning Manual

8 Tool Management
8.3 Start–up in NCK
8.3 Start–up in NCK
Requirements
Execution
8.3.1

Enter the NC machine data

Machine data for
memory setting
8-80
S
PCU startup is performed and the connection to the NCK established.
S
NCK startup is carried out with the default machine data.
S
Enter the NCK machine data for tool management.
S
Create a new configuration file for tool management or use and adapt the
examples from the toolbox.
S
Load the configuration file into the controller.
In order to use tool management the machine data for memory setting and for
activating tool management must be set.
Memory space must be made available for tool management in the battery–
backed RAM.
The following machine data must be set:
MD 18080 Activate the memory for the tool management
MD 18082 Number of tools to be managed by the NCK
MD 18084 Number of turrets that the NCK can manage (min. 3);
include intermediate memory and loading magazine in the count!
MD 18086 Number of turret locations that the NCK can manage;
include 1 intermediate memory location (tool holder) and
2 load locations in the count!
MD 18100 Number of cutting edges in the NCK
Note
ShopTurn can manage 9 cutting edges per tool.
Define the total number of all available cutting edges in
MD 18105 MM_MAX_CUTTING_EDGE_NO.
It is not necessary to enter the number of tools multiplied by 9 cutting edges.
You can simply specify approximately how many cutting edges you will need in
total.
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006