Siemens Sinamics G120P Operating Instructions Manual page 410

Functions
7.7 Application-specific functions
Table 7- 35 Order of deactivation for external motors depending on setting in p2371
p2371 Activated motors
1 M1
2 M1+M2
3 M1+M2
4 M1+M2+M3
5 M1+M2+M3
6 M1+M2+M3
7 M1+M2+M3
8 M1+M2+M3
If you are using motors of the same power rating, you can use p2372 to define whether the
motors are to be activated/deactivated following the setting specified in p2371 (p2372 = 0) or
based on the operating hours (p2372 = 1, 2 ,3. Details see parameter list).
410
Stage 1 Stage 2
M1
M1+M2 M1
M1+M2 M2
M1+M2+M3 M1+M2
M1+M2+M3 M3+M1
M1+M2+M3 M3+M2
M1+M2+M3 M3+M1
M1+M2+M3 M3+M2
Stage 3 Stage 4
M1
M1
M3 M1
M2+M1 M2
M3 M2+M1
M3+M1 M3
Operating Instructions, 12/2014, A5E32923362A
Stage 5 Stage 6
M1
M1
M2 M1
Inverter cabinet units