Operation
6.10 Operation with the IOP
NOTICE
Unexpected drive response
If data transfer to or from the drive is interrupted, the data could be corrupted and could
result in unexpected system response.
• Do not interrupt the data transferred to or from the drive.
• If the transfer process is interrupted, restore the drive to the factory settings before it is
Note
Fault display during the upload/download
If a fault occurs during the upload/download process and a fault display appears, press Esc
to continue the upload/download process. Pressing OK aborts the upload/download process.
6.10.4.5
Extras
Overview
The following options for configuring the IOP are available in
the "Tools" menu:
• Display status wizard
• Drive identity
• Parameter settings
• Panel settings
"Display status" wizard
This wizard supports the user when configuring the infor-
mation displayed on the "Status" screen. By default, the
output voltage and speed of the inverter are displayed. The
wizard can be used to display other physical values of the
inverter. Known conversion factors and offset values can be
used to match the displayed dimension units to the associ-
ated requirements.
322
parameterized further or it takes over control of the application.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A