Sony DVS-9000SF User Manual page 452

Icon Title
Internal
Error:
Data HDD
Internal
Error:
HDD is
incorrect
Internal
Error:
Temporary
HDD
Invalid
Name
Set Time/
Date
Warning
Warning
452
Error Messages
Message
The user data partition of hard
disk drive is damaged, and all
data is lost. The hard disk drive
needs to be reformatted.
Please execute HDD format on
Page 7317.
Hard disk is incorrect or not
formatted.
To format the hard disk, please
execute "HDD Format" on Page
7317.
The system data partition of
hard disk drive is damaged.
The hard disk drive needs to be
reformatted. Please execute
HDD format on Page 7317.
Please make sure to save all
data in the user data partition
of hard disk drive to any other
device or media, before
reformatted.
Empty...
The file exists already...
Error: Wrong Format.
No Switcher information
available.
Please confirm "Network
Configuration" on Page 7311.
This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
Description
When starting up the menu system, an error
was found on the hard disk.
In the 7317: Engineering Setup>System>
Maintenance menu, execute [HDD Format].
2121: Frame Memory>Edit>Freeze>Store
In the above menu, a Store was carried out
without specifying a name.
Alternatively:
71XX: File menu
7171: File>Configure>Directory
In the above menu, when renaming a file or
creating a directory, the name was not entered.
Enter the name correctly.
2121: Frame Memory>Edit>Freeze>Store
In the above menu, the file name specified for a
store operation already exists in the switcher.
Specify a different name.
7317: Engineering Setup>System>
Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in the 7311: Engineering Setup>System>
Network Config menu, retry [Auto Config].
6211.1: Effect>Master Timeline>Store>Edit
6311.1: Snapshot>Master Snapshot>Store>
Edit
6411.1: Shotbox>Register>Store>Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.