Sony DVS-9000SF User Manual page 328

To display the Output Config menu
In Engineering Setup, select VF5 'DCU' and HF3 'Output Config.'
The status area shows output port information.
Assigning a GPI output port
Use the following procedure.
1
2
3
4
Releasing the assignment of a GPI output port
Use the following procedure.
1
2
3
328
Setup Relating to DCU
In the DCU>Output Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
In the <Parallel Output Assign> group, press [GPI Output].
Using any of the following methods, select the output port and GPI output
number.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter
1 Parallel Output Slot
2 Parallel Output Port
5 GPI Output
To confirm the selected setting, press [GPI Output Set].
This confirms the selection, which is reflected in the status area.
In the DCU>Output Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
In the <Parallel Output Assign> group, if [GPI Output] is on, press it to
turn it off.
Turn the knobs to select the slot and port to which the setting applies.
Knob Parameter
1 From Slot
2 From Port
3 To Slot
Adjustment
Output port slot
Output port
GPI output
Adjustment
First port slot
First port number
Last port slot
Setting values
2 to 6
1 to 54
1 to 50
Setting values
2 to 6
1 to 54
2 to 6