Settings Relating To Video Switching (Transition Menu) - Sony DVS-9000SF User Manual

Settings Relating to Video Switching (Transition Menu)

For settings relating to video switching, use the Switcher>Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 'Switcher' and HF4 'Transition.'
The status area shows the transition preview, key transition, bus toggle, and
split fader settings for each M/E and P/P bank.
Selecting the bank to which the settings apply
In the Transition menu, using any of the following methods, select the bank to
which the settings apply, then make the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Bank
The selected bank appears in reverse video.
Setting the transition preview mode
To select the transition preview mode, in the <Transition Preview> group of
the Transition menu, select any of the following.
One Time: The transition preview ends after a single transition.
Normal: Switching the [TRANS PVW] button on or off switches between the
transition preview mode and the normal mode.
Selecting the transition mode of the independent key transition
control block
To select the key transition mode, select any of the following in the <Key
Transition> group of the Transition menu.
Same: The transition settings for the On and Off directions are the same.
Independ: The transition settings for the On and Off directions can be set
separately.
Selecting the background transition flip-flop mode
In the Transition menu, press [Bus Toggle], to switch between on and off.
On: Flip-flop mode
Off: Bus fixed mode
M/E or P/P selection to which settings apply
Setting values
1 to 4
Setup Relating to Switcher Processor
299