5
Masking the Defocus effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 59).
Blur Settings
This effect blurs the entire image.
Applying the Blur effect
Use the following procedure.
1
2
3
46
DME Special Effect Operations
• When Video is selected
Knob
Parameter
1
H
2
V
3
All
To cancel black level leaking that can occur at the edge of the screen when
the Defocus effect is enabled, press [Clean Defocus], turning it on.
In the DME menu, select VF2 'Video Modify' and HF1 'Defocus/Blur.'
The Defocus/Blur menu appears.
Press [Blur], turning it on.
The Blur effect is enabled. You can adjust the blurring of video and key
signals with the knobs.
Set the parameters.
Knob
Parameter
1
H
2
V
3
All
Adjustment
Horizontal defocusing of video
signal
Vertical defocusing of video
signal
Horizontal and vertical
defocusing of video signal
Adjustment
Horizontal defocusing of video
and key signals
Vertical defocusing of video and
key signals
Horizontal and vertical
defocusing of video and key
signals
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown