Sony DVS-9000SF User Manual page 290

To assign the output of each bank in Multi Program mode
When you selected [Multi Program] in the procedure described in "Setting the
operation mode" (page 289), use the following procedure.
1
2
3
To set the output configuration for each bank
When you selected [Multi Program] or [DSK] in the procedure described in
"Setting the operation mode" (page 289), use the following procedure.
1
2
3
4
290
Setup Relating to Switcher Processor
In the Switcher>Config menu, press [M/E Output Assign].
The M/E Output Assign menu appears.
On the list in the status area, select the bank output to be assigned.
The selected output appears in reverse video.
In the <M/E Output Assign> group, select the output signal to be assigned.
In the Switcher>Config menu, press [PGM Config].
The PGM Config menu appears.
The status area shows the background and key configuration assigned to
the output of each bank.
Using either of the following methods, select the output for which you
want to make the setting.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
The selected output appears in reverse video.
In the <Bkgd> group, select the background.
In Multi Program mode, select [Clean] or [Utility2], then skip to step 5.
In DSK mode, select one of [Bkgd1] to [Bkgd4].
In DSK mode, turn the knobs to select the background signal.
Knob Parameter Adjustment
2 to 5 Bkgd1 to 4 Background signal selection
a) 1 to 6: M/E1 OUT1 to 6
7 to 12: M/E2 OUT1 to 6
13 to 18: M/E3 OUT1 to 6
Setting values
a)
1 to 18