Siemens Sinamics S120 Manual page 747

1. Screw the interlocking bolts into the thread provided in the housing.
2. Insert the connector, including the motor cable, and lock it in place using a screwdriver or
Installation on Motor Modules with pre-assembled interlock bolt
If Motor Modules with a pre-assembled interlock bolt are used, step 1 described above can
be omitted.
Figure 12-27 Installation example: Screw connector
Simply insert the connector, including the motor cable, and lock it in place using a
screwdriver or size 4 hexagon socket-head screw clockwise by turning a ¼ turn (90°).
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
size 4 hexagon socket-head screw clockwise by turning a ¼ turn (90°).
Cabinet design and EMC Booksize
12.8 Connection systems
747