Accessories
11.4 DC link rectifier adapter for Booksize format
11.4.5
Mounting
Danger to life through electric shock if the cutout in the protective cover has been broken
out
If the 24 V terminal adapter or the DC link infeed adapter is removed, and you touch live
parts this will result in death or severe injury.
• Replace the protective cover with the broken out cutouts by a new protective cover.
11.4.5.1
Installation on components that are 50 mm and 100 mm wide
Required tools:
● Slot-head screwdriver (1 x 5.5) for releasing the protective cover
● Torx T10 screwdriver to fasten the 24 V terminal adapter
● Torx screwdriver T20 for DC link screws (Torx slot)
● Pliers for breaking out the cutouts
Table 11- 16 Removing the DC link busbars
Release and open the protective cover. Remove the upper left-hand screw and
658
WARNING
the DC link bridge
Remove the lower left-hand screw and
the DC link bridge
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6