Accessories
11.5 DC link adapter
11.5.5
Installation
Note
By moving the adapter housing, the DC-link adapter can be fitted on either the left-hand or
right-hand side of the component. This configuration is possible for all Active Line Modules.
Required tools:
● Slot-head screwdriver (1 x 5.5) for releasing the protective cover
● Torx screwdriver T20 for DC-link screws (Torx slot)
Table 11- 23 Mounting the DC-link adapter
Release and open the protective cover of the DC link.
670
Remove the DC-link screws.
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
Booksize Power Units