Main Menus And Toolbars - Siemens SINUMERIK 840D sl Operating Manual

4. To arrange the dockable window again in the lower window area, proceed as described
above.
5. Another option is that the dockable window is displayed separately from Expert as its own
window on a second screen.
To do this, move the desired window out of the interface of Expert.
Figure 4-4 Displaying a dockable window separated from Expert as its own window
4.2.2

Main menus and toolbars

Table 4-1
Project
New...
Open...
Save
Save All
Save As...
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
<Ctrl+N> Creates a new project under the specified name and storage path.
<Ctrl+O> Opens an existing project. Also permits an older project to be selected for conver‐
sion.
<Ctrl+S> Saves the selected project and all internal or externally linked components belong‐
ing to this project, if there is a save request for these.
<Ctrl+Shift Saves all projects and components for which there is a save request.
+S>
Saves all opened projects and components under a different name or location.
Create MyConfig - Expert
4.2 Introduction
97