Create MyConfig - Topo
6.6 SINAMICS device configuration
Figure 6-13
Configuration of a CMC package with comparison topology or user-specified topology
Compatibility of CMC versions and CNC software releases
The Topo XML interface is available in the version SCI 2.6, CMC V4.4/4.5 and CMC V4.6.
For transfer, CMC Topo V4.6 no longer supports the Topo XML interfaces SCI 2.6 and CMC
V4.4/4.5.
Note
CMC Topo 4.6 can only generate comparison or user-specified topology for CMC packages
4.6.
For deployment of a user-defined topology, the CNC system software version must be defined
to which this will be applied.
CMC Topo V4.6 supports the CNC software versions V2.6, V2.7, V4.4, V4.5, and V4.6.
390
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD