Siemens SINUMERIK 840D sl Operating Manual page 176

Create MyConfig - Expert
4.4 Project folder
As a prerequisite, this Axis-drive assignment must have been configured and activated in Topo.
DO variables
There is a list of all DO variables that are in the DO variable list in the comparison topology in
the upper part of the dialog page.
The properties of the DO variables are specified in this list, and using a checkmark at the
beginning of the line it is indicated whether a DO variable is used, i.e was assigned to a drive
object.
DRIVE-CLiQ wiring
The Drive-CLiQ wiring of the components and the assignments of the DO variables to these
are displayed in the center of the dialog page.
Column "SM" indicates as to whether asensor module involves a first or second encoder.
Sensor modules are shown in blue.
Column "AX DR" includes information about theaxis-drive assignment.
Comparison topology (*.ust)
Using the "Comparison topology" drop-down list, a file that was assigned to the package or a
file located next to the package (prefix: "./") can be used.
A file from a different location and with another extension (e.g. xml, from E-CAD system) can
be selected with the "Browse" button.
Displaying additional details
In the comparison topology, additional information can be hidden or displayed for diagnostics
in the list and tree view using the "Display additional details" checkbox.
Status bar
The Article number and the serial number of the selected component are displayed in the
status bar above the buttons.
Buttons for the package processing dialogs
Information on the general buttons in the dialogs can be found under Meaning of buttons
(Page 126).
176
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD