Siemens SINUMERIK 840D sl Operating Manual page 30

Create MyConfig - Diff
3.3 SINUMERIK archive comparison
The values specified in brackets after a data node specify how many identifiers of a node are
displayed and how many identifiers there are in a node.
Examples:
⑤
Selective tab
In this area, the data nodes of the comparison objects are shown in a tree structure in the
comparison mode "Normal" or in the comparison mode "Selective".
In the "Selective" comparison mode, the data structures of all comparison objects (archives,
files) are placed one below the other - the structure is separately established for every
comparison object.
Contrary to the "Normal" comparison mode, in the "Selective" comparison mode, all data end
nodes of the same type can be compared with one another as required.
The data, which should be compared with one another, is selected by activating the end nodes.
⑥
Display result: Different / The same / Not available in all comparison objects
These values provide information as to how many identifiers in the comparison results have
unequal (red) or equal (black) values or which values do not exist in all comparison objects
(blue/green arrows).
⑦
Expert list and filterconfigurations
If the functions "Expert list" and "Filter" are active in the comparison configuration, the relevant
symbols will be displayed.
With a double click on the symbols, the expert list or filter in the comparison configuration is
opened.
Note
Using "Expert list" and "Filter," non-relevant identifiers can be excluded from the comparison,
so that these are no longer displayed.
⑧
Display of the comparison configuration
The comparison configuration that is being used in the actual comparison is displayed in this
field.
The comparison configuration is opened with a double-click.
⑪
Result from the Normal tab / Selective tab
The data of the nodes selected in areas
of the user interface.
30
The equal character in the end node indicates that the data of the objects being compared
is identical within this end node.
The unequal character in the end node indicates that not all of the data of the objects
being compared is identical within this end node.
This node contains 1173 identifiers and they are all displayed.
This node contains 1173 identifiers, and as a result of the Expert list or the
filter, only 1086 identifiers are displayed.
④ ⑤
and is prepared in a tabular form in this area
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD