Topo - Menu Functions - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Topo
6.3 Overview of user interface
6.3.2

Topo - menu functions

Designation
Project
New
Open...
Save
Save as...
Verification of package
Deployment
Load topology in controller
Displaying/importing topology
Print Topology
Properties...
Last Opened
Displayed last
Close all
Exit
Edit
360
Meaning
<Ctrl+N> Create a new project.
<Ctrl+O> Open an existing project (*.uptz).
<Ctrl+S> Save the current project as *.uptz file.
If components are changed, they are marked in the topology
tree with an asterisk at the component. The diskette symbol is
active so that the changes can be saved.
Saves the current project under another path or file name.
Checks an opened topology regarding the correct allocation of
DO variables, component numbers, errors in the axis-drive as‐
signment (AAZ).
A check is not made as to whether the wiring is permissible
according to SINAMICS guidelines.
Deployment of an open topology in a *.ust (reference topology)
or *.utz file (user-specified topology), which can be used by the
package. The topology is first checked.
For the extended target topology, deployment as Windows *.exe
or Linux package *.usz is possible. The topology can thus also
be executed as package.
The finished project can be loaded into the controller via a net‐
work connection. A configured package is executed in the back‐
ground. This is not an archive.
The topology can only be loaded into the controller with the ex‐
tended user-specific topology.
It must be ensured that source data (archives or ASCI datasets)
is not generated from a software version that is newer than the
target software version.
Displays a previously exported topology (*.ust) created by an
electrical engineering design system (*.xml), a topology extrac‐
From topology...
ted from a drive archive or directly from a topology taken from
From archive...
a control.
In this case, the external topology is opened, write-protected
and is not imported into the actual project.
When closing the topology, this can be imported into the project.
From control For this purpose, a network connection must be established,
specifying the IP address.
From exchange for‐
mat....
Prints either the topology tree or the topology graph.
Shows important project properties, such as path of the project,
date of change, changed by, version and comment.
The projects opened last can be selected.
The projects displayed last can be selected.
Closes the open project.
<Alt+F4> Ends the Topo program.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD