Siemens SINUMERIK 840D sl Operating Manual page 352

Create MyConfig - Expert
4.15 Reimporting packages
Rules for a reimport
● When opening a reimported project or a reimported component, all passwords are removed
that are not identical to the password used for opening.
The entry <permissions without password> remains unchanged with its configured rights.
In the result, in the password list, there are a maximum of 2 entries; the entry
<rights without password> and the entry of the password used.
Note
This point is only implemented, if you logged on with a password for "Package reimport full
access" and the project was subsequently saved.
● If the password used has the permission "Package reimport full access," in addition to this
permission, after the reimport, all of the other permissions to the project/component will
also be assigned to it.
● If the password used only has the permission "Package reimport read," no other additional
permissions are allocated.
The project or the component cannot be stored and any passwords with "Full access to
reimport" are therefore retained.
● No permissions for reimporting a component have been granted, it can be deployed but
not viewed or modified.
Reimported components that have permissions for the project password used are opened
with this permissions without an additional query.
Otherwise, the password protection behaves in the same way as for reimported
components.
352
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD