Tool management
11.2 Magazine management
11.2
Magazine management
Depending on the configuration, the tool lists support a magazine management.
Magazine management functions
● Press the "Magazine" horizontal softkey to obtain a list that displays tools with magazine-
● The Magazine / Magazine location column is displayed in the lists.
● In the default setting, the lists are displayed sorted according to magazine location.
● The magazine selected via the cursor is displayed in the title line of each list.
● The "Magazine selection" vertical softkey is displayed in the tool list.
● You can load and unload tools to and from a magazine via the tool list.
11.3
Tool types
A number of tool types are available when you create a new tool. The tool type determines
which geometry data are required and how they will be computed.
Tool types
Figure 11-1
354
related data.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Example of Favorites list
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling