Siemens SINUMERIK 828D Operating Manual page 22

Introduction
1.2 Operator panel fronts
Key
22
Function
<TAB> + <SHIFT>
+
Moves the cursor to the left in the next cell. In so doing, also changes into
the next line to the righthand cell.
<SHIFT>
Press the Shift key to enter the upper character shown on the dual input
keys.
<CTRL> + <A>
+ <A>
Selects all entries in the actual window. (only in the editor and program
manager).
<CTRL> + <C>
+ <C>
Copies the selected content.
<CTRL> + <L>
+ <L>
The actual user interface scrolls through the installed languages.
<CTRL> + <P>
+ <P>
A screenshot of the actual user interface is created and saved as file.
<CTRL> + <X>
+ <X>
Cuts out the selected text. Text is located in the clipboard.
<CTRL> + <Y>
+ <Y>
Changes that have been reset are reactivated. (only in the editor).
<CTRL> + <V>
+ <V>
Inserts text from the clipboard:
To the actual cursor position
•
Replaces selected text
•
<CTRL> + <ALT> + <S>
+ + <S>
Creates a complete archive on an external data carrier (USB-FlashDrive).
<CTRL> + <SHIFT> + <L>
+ + <L>
The actual user interface scrolls through all of the installed languages in
the inverse sequence.
<ALT> + <S>
+ <S>
Opens the Input Method Editor to enter Asian characters.
<ALT> + <SHIFT> + <D>
+ + <>
Backs up the log files on the USB-FlashDrive. If a USB-FlashDrive is not
inserted, then the files are backed-up in the manufacturer's area of the
CF-Card.
<DEL>
Edit mode:
•
Deletes the first character to the right.
Navigation mode:
•
Deletes all characters.
<DEL> + <CTRL>
+
Edit mode:
•
Deletes the first word to the right.
Navigation mode:
•
Deletes all characters.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling