Display Active Zero Offset - Siemens SINUMERIK 828D Operating Manual

Setting up the machine
2.7 Work offsets
Base offset
The base offset is a work offset that is always active. If you have not defined a base offset,
its value will be zero. The base offset is specified in the "Work offset - Base" window.
Coarse and fine offsets
Every work offset (G54 to G57, G505 to G599) consists of a coarse offset and a fine offset.
You can call the work offsets from any program (coarse and fine offsets are added together).
You can save the workpiece zero, for example, in the coarse offset, and then store the offset
that occurs when a new workpiece is clamped between the old and the new workpiece zero
in the fine offset.
2.7.1

Display active zero offset

The following work offsets are displayed in the "Work Offset - Active" window:
● Work offsets, for which active offsets are included, or for which values are entered.
● adjustable work offsets
● Total work offset
This window is generally used only for monitoring.
The availability of the offsets depends on the setting.
Procedure
Note
Further details on work offsets
If you would like to see further details about the specified offsets or if you would like to
change values for the rotation, scaling or mirroring, press the "Details" softkey.
90
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Work offset" softkey.
The "Work Offset - Active" window is opened.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling