Additional Data - Siemens SINUMERIK 828D Operating Manual

Procedure
See also
Displaying tool details (Page 383)
Changing a tool type (Page 384)
11.5.1

Additional data

The following tool types require geometry data that is not included in the tool list display.
Tools with additional geometry data
Tool type
111 Conical ballhead cutter
121 End mill with corner
rounding
130 Angle head cutter
131 Angle head cutter with
corner rounding
140 Face milling
155 Bevel cutter
156 Bevel cutter with corner
rounding
157 Conical die-milling cutter
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool list" window is opened.
Additional parameters
Corner radius
Corner radius
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Geometry length (length X, length Y, length Z)
Corner radius
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
External radius
Tool angle
Taper angle
Corner radius
Taper angle
Taper angle
Tool management
11.5 Tool list
365