Procedure
5.8.3
Rotating the graphical representation
In the 3D view you can rotate the position of the workpiece to view it from all sides.
Requirement
Simulation has been started and the 3D view is selected.
Procedure
...
...
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1.
Press a cursor key if you want to move the graphic up, down, left, or
right.
1.
Press the "Details" softkey.
2.
Press the "Rotate view" softkey.
2.
Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" and "Arrow counterclockwise" softkeys to change the
position of the workpiece.
- OR -
Keep the <Shift> key pressed and then turn the workpiece in the
desired direction using the appropriate cursor keys.
5.8 Changing and adapting a simulation graphic
Simulating machining
165