Philips IntelliVue TRx Instructions For Use Manual page 76

Physiologic Alarms
Alarm Text
** MULTI ST Lx, Ly
** NURSE CALL
** SpO T yyy > xxx
2
** SpO T yyy < xxxx
2
** ST lead > xxx
** ST lead < xxx
* HR yyy > xxx
* HR yyy < xxx
5-6
Alarms
Physiologic (Patient) Alarms
Priority Condition
Yellow Two ST leads (Lx and Ly) exceed alarm
limit elevation or depression for > 60
seconds (EASI mode or when selected).
Yellow The Telemetry button on the transceiver
has been pressed (and the system is
configured to alarm and the Telemetry
button is on.
Also initiated if the installation includes a
paging system and the Information Center
is configured for paging upon receipt of
Nurse Call signal.
For IntelliVue Information Centers
Note—
Release J and later, Nurse Call is a
yellow, one star (*) alarm.
Yellow High SpO
SpO value (yyy) greater than high SpO
2
limit (xxx).
Yellow Low SpO
SpO value (yyy) less than low SpO
2
(xxx).
Yellow STlead is greater than the Elevation limit.
Yellow STlead is less than the Depression limit.
Yellow Heart Rate (yyy) greater than the upper
Heart rate limit (xxx).
Yellow Heart Rate (yyy) lower than the lower
Heart Rate limit (xxx).
.
2
.
2
Source
ST/AR ST
Clinician-
initiated at
transceiver
or by
paging
subsystem
SpO
2
2
SpO
2
limit
2
ST/AR
ST/AR
ST/AR
Basic &
Enhanced
Arrhythmia
ST/AR
Basic &
Enhanced
Arrhythmia