Unit-Configurable Settings - Philips IntelliVue TRx Instructions For Use Manual

Telemetry Functions at the Information Center
Patient-Configurable Settings in Telemetry Setup
Control Function
SpO Alarm Turn SpO
2
Information Center.
Unit Settings Change current settings back to
last saved clinical unit settings.
Unit-
Configurable
Settings
Unit Settings - Telemetry Setup
Control Function
Patient Type Set patient type used for SpO
and NBP alarm limits.
9-8
Telemetry Functions at the Information Center & TeleMon
alarms on/off at the
2
Unit Settings provide access to clinical configuration items that affect all
patients on an Information Center. Changes in unit settings take effect upon
discharge, except for Standby duration and SpO
immediately.
Access to unit settings requires a password, and the displays are in English.
Telemetry specific settings are accessed through All Controls -> Unit Settings
-> Telemetry Setup. The setting for telemetry non-arrhythmia yellow alarms
is located in All Controls -> Unit Settings -> Alarms Unit Settings. For all
other information on unit settings, see IntelliVue Information Center
Instructions for Use.
Setting Choices
enable (on)
disable (off)
(none)
Settings
Adult
2
Pediatric
Factory
Default
enable
mode, which take effect
2
Factory
Default
Adult