Transceiver Safety Information; Turning The Transceiver On/Off; Turning On - Philips IntelliVue TRx Instructions For Use Manual

Transceiver Safety Information

Transceiver Safety Information

Turning the Transceiver On/Off

Turning On

4-2
Basic Operation
Warning Warning
The system is not completely immune from radio interference although it is
designed to minimize interference through smart hopping. Sources of
interference that may be a problem include failing fluorescent lights and
construction equipment. See "Electromagnetic Compatibility" on page 12-5.
Warning Warning
Place the transceiver in a pouch or over clothing, or both, during patient
use. The transceiver should not touch the patient's skin during use.
Warning Warning
Arrhythmia relearning is initiated whenever the transceiver is powered
down for one minute or longer. Be sure to check your patient's arrhythmia
annotation for accuracy whenever relearn has occurred.
The transceiver is powered by two AA alkaline batteries. To turn the transceiver
on, insert both batteries. When batteries are inserted:
1. All indicators illuminate briefly.
2. A sequence of sounds indicates the instrument is ready for use.
a. a single beep, indicating that the self test was passed.
b. a series of double beeps, indicating the transceiver is attempting to
establish contact with the Information Center.