Configuring Computed Sources - Bosch DISBLAY DDU 7 Manual

10 | Analog and Frequency Inputs
Notice
10.4
80 / 160
4. Click 'Finish' when done.
5. Enter channel name and description.
6. Click 'OK' when done.
The channel is inserted into the DDU 7 Project Tree.
Channel is linked
to REV01
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Measurement of 'Revolution' is similar.

Configuring computed sources

Computed sources receive data from a measurement channel rather than an in‐
put pin.
▪ Sensitivity/Offset calculation on input channel
DDU 7 Manual
Number of teeth on the
pulse wheel
Circumference of wheel
for speed calculation
Choose data type of the
measurement variable
Enter name to automatically
create a new measurement sheet
Input pin
Number of Wheel
has hall
teeth circumference
interface
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
Bosch Motorsport