Bosch DISBLAY DDU 7 Manual page 42

8 | Display Configuration
8.3.3
42 / 160
Gear Lookup Table Wizard
1. Set up the settings as shown in the screenshot.
This column shows
the numeric value
of the input channel
This column shows
the ASCII value of
the output channel
2. Click 'OK' when done.
The 'Create channel on DDU 7 ' window appears.
3. Enter the name and an optional description of the translated ASCII measure‐
ment channel.
4. Click 'Ok' when done.
A graphic shows the connection between the input and output channels. The
measurement channel can now be used in the shift LED configuration.
Creating customized LED pattern
You can create your own LED pattern with an individually created condition. The
LEDs flash if the condition becomes true.
1. Click on the button 'Add pattern' in the display view. The LED pattern config‐
uration window appears.
DDU 7 Manual
Choose the input
channel of the
gear information
Enter the default
ASCII value that
is set if no output
value is entered
in the table
e.g. 'gear ASCII'
Bosch Motorsport