Starting Up; Before Starting - Bosch DISBLAY DDU 7 Manual

7.1.1
7.1.2
Bosch Motorsport
7

Starting up

7.1

Before starting

Install the software required DDU 7 operation. It is developed for Windows sys‐
tem software. Following software versions are used in this manual:
▪ DDU 7 setup, configuration and calibration: RaceCon
▪ Measurement data analysis: WinDarab V7
Set up the 100 Mbit Ethernet connection to the DDU 7.
▪ The Ethernet port has 'cable auto crossover' functionality
Setting up the network interface
The DDU 7 contains a DHCP server, network addresses can be assigned automat‐
ically to the configuration PC. The IP address of DDU 7 is 10.10.0.208.
1. Switch off the PC's firewall.
2. Set up the PC's network interface as shown in the screenshots.
Starting the unit
The DDU 7 powers up by turning on the ignition of the car. At startup the DDU 7
will display a Bosch logo.
Select
'Internet Protocol
(TCP/IP)'
Click
'Properties'
DDU 7 Manual
Starting up | 7
Select 'Obtain
an IP adress
automatically'
Click 'OK'
when done
15 / 160