Bosch DISBLAY DDU 7 Manual page 117

13.3.4
Bosch Motorsport
2. Click on FM 40 in Project Tree to display the Properties Menu.
Adding channels to telemetry
1. Expand the list of 'Loggers' by clicking on '+' in the DDU 7 Project Tree.
2. Double‐click on 'Recording' in DDU 7 Project Tree.
The recording configuration is displayed in the Main Area.
3. Click 'Edit channel(s)'.
The 'Edit Recording Channels' window appears.
4. Choose between 'Fast/Slow block' transmission.
See chapter 'Adding a recording group' for information about 'Fast/Slow
block'.
None: Channels are not transferred
Slow: Channels are transferred into the slow telemetry block
Fast: Channels are transferred into the fast telemetry block
Telemetry channels with special functionality
The FM 40 allows the transmission of special information such as running dis‐
tance of current lap, lap number of current lap and lap time, fuel consumption of
last lap completed. You have to assign the channel type to the telemetry channel
so that it is recognized accurately by RaceCon.
Channel's names are e.g.: distlap, fuelcons, lapctr, laptime. Different channel
names are possible between different devices (e.g. ECU MS 3 Sport, ECU MS 5.1).
DDU 7 Manual
Path of configuration folder of WDServer on receiver PC
(usually ...\WDServer\DCP) to store telemetry configuration file
Project key (1111 ... 9999)
Baudrate of Display (must match baudrate of FM 40)
Transmission pause
5 % recommended for improved re-syncronization
Recording and Telemetry | 13
117 / 160