Bosch DISBLAY DDU 7 Manual page 75

Notice
10.3.4
Bosch Motorsport
Measurement label
raw_name
raw_name_fi
name
name_fi
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement
Configuring a multipoint adjustment
Example: Measurement of wheel force
▪ Physical property 'wheel force' not directly measureable
▪ Load transfer through suspension kinematics
▪ Physical value at sensor position defined by vehicle
▪ Curve definition by online adjustment at vehicle
Force at wheel
1. Click on 'Measurement Sources' in the Toolbox.
2. Expand the list of 'I/O Channels' by clicking on '+' in the DDU 7 Project Tree.
3. Drag the 'Multipoint Adjustment' analog signal source from the Toolbox and
drop it on the desired analog input channel in DDU 7 Project Tree.
Drag + Drop
DDU 7 Manual
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
Force at sensor
Analog and Frequency Inputs | 10
[} 88]'.
75 / 160