Bosch DISBLAY DDU 7 Manual page 128

14 | Lap Trigger
14.1.5
Notice
128 / 160
Setting up a lap trigger
1. Click 'Measurement Sources' in Toolbox.
2. Drag 'Laptrigger' into 'System Overview' and drop it on vehicle. Do not drop
it on 'DDU 7'!
A 'Laptrigger Wizard' window opens.
3. Click 'Finish' to complete the operation.
In this example, the Rx is connected to the dedicated lap trig-
ger pin of DDU 7. The channel 'speed' is calculated from 4
wheel speeds.
A pre‐configured lap trigger window opens.
DDU 7 Manual
Drag + drop
Choose the signal device
for the trigger signal
Choose the signal channel
for the trigger signal
Choose the source for the
vehicle speed
Enter the distance of
the racetrack
Bosch Motorsport