Bosch DISBLAY DDU 7 Manual page 155

Bosch Motorsport
1. Assign the desired mounting location (e.g. 'Front') and confirm by clicking
'Apply'
2. The mounting location is now stored in the device. The device will do a reset
and the 'RUN' led on the device will change to green. The list will show the
new mounting location assignment.
It is good practice to physically label the M 60 with its mounting location.
Now the device is ready to be used.
A different coloring of the M 60 is used to indicate that the device is already con‐
figured in the currently loaded RaceCon project or not (white/orange).
DDU 7 Manual
Enhancements | 19
155 / 160