Bosch DISBLAY DDU 7 Manual page 77

Notice
Bosch Motorsport
Physical limits
of channel
Working with automatically created measurement sheet is ex-
plained in chapter 'Setting up an online measurement
7. Click 'Finish' when done.
8. Enter channel name and description.
9. Click 'OK' when done.
The channel is inserted into the DDU 7 Project Tree.
Channel is linked
to ANA06
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Online definition of the curve is covered in the chapter 'Online calibration of
measurement channels
DDU 7 Manual
Characteristic
curve for sensor
Input pull-up resistor
is deactivated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
[} 94]' of this manual.
Analog and Frequency Inputs | 10
Enter physical limits
of the sensor
Choose data type
of the measurement
variable
Enable additional
online calibration
Enter name to auto-
matically create a
new measurement
sheet
[} 88]'.
Adjustment
is enabled
77 / 160