Bosch DISBLAY DDU 7 Manual page 51

8.7.2
Bosch Motorsport
The ‚create/edit condition' window appears.
Create/Edit Condition Window
1. Define the condition channel using the following configuration possibilities:
a)
b)
c)
d)
e)
a) Enter the name of the conditional channel.
b) Select the comparing mode:
- Constant: Compare a measurement channel with a constant value.
- Channel: Compare a measurement channel with a measurement channel.
- Range: Compare a measurement channel with a defined value range.
- Multiple: Compare a measurement channel with up to 5 constant values.
c) Depending on the chosen comparing mode, you can enter the following values:
- Constant: Choose the measurement channel or condition, the operator and enter the value of the channel.
- Channel: Choose the measurement channel or condition, the operator and the measurement channel or
condition to be compared.
- Range: Choose the measurement channel or condition, the operator and define the minium and
maximum value.
- Multiple: Choose the measurement channel or condition, the operator and enter the value of up to 5 constants.
d) Enter the minimal time to detect the signal of the measurement channel to avoid high-frequent switchovers.
e) Enter the time the signal of the measurement channel is delayed after its ending.
f) Choose the output setting of the result.
- Constant TRUE/FALSE: Result is as a constant with the value TRUE or FALSE.
- Blinking: Result is a blinking if the condition is fulfilled.
- Pulse: Result is a short one-time pulse if the condition is fulfilled.
- Toggling output: Result is a pulse that lasts until the next condition is fulfilled.
2. Click 'Ok' when done.
The conditional channel is displayed in the DDU 7 condition channel window.
Creating a new condition combination
1. Follow the steps shown in the screenshot.
DDU 7 Manual
Display Configuration | 8
f)
51 / 160