Bosch DISBLAY DDU 7 Manual page 43

8.3.4
Bosch Motorsport
a)
b)
c)
a) Choose the number and color of the LEDs by right-clicking.
b) Select if the LEDs blink or do not blink.
c) Choose the condition when the LEDs will flash.
- Create a condition using the Condition Creator. For more information see chapter "Creating a new
condition channel".
- Choose an existing condition.
d) Check the box to show a demo of the LEDs. (Important to check blinking)
To create a LED that alternately blinks in two different colors, choose 'Display "on" pattern' and define
the LEDs in the one color. Then choose 'Display "off" pattern' and define the LEDs in the other color.
2. Click 'OK' when done.
3. The configuration is displayed in the DDU 7 LED Configuration window.
Assigning display pattern priority
You can assign the priority of the created display pattern and shift lights.
The 1st display pattern is activated before all following pattern if its condition is
'true'. The 2nd display pattern is only activated if the condition of the 1st display
pattern is 'false' or the LEDs of the 1st display pattern are transparent.
Change the priority by clicking the 'Move up' or 'Move down' button.
DDU 7 Manual
Display Configuration | 8
d)
43 / 160