Assign Vm/Aa Port - Samsung OfficeServ 7000 Series Programming Manual

[207] ASSIGN VM/AA PORT

Enables SLI ports to be designated as NORMAL or VM/AA. VM/AA ports receive digits
designated in MMC 726 (VM/AA Options) and also receive a true disconnect signal on
completion of a call. Only SLI (Single Line Interface) cards, not keyset daughter-boards,
support disconnect signal. Do not make VM/AA ports data; this will return them to a single
line port and stop voice mail integration. VM/AA ports have the equivalent of data protect
written in the program and are protected against tones.
When using the MMC [207]
This MMC is not used to assign voice mail card ports. Voice mail card ports are
assigned as voice mail ports automatically when the system detects an SVM-400
or SVMi-20 card or embedded VM.
DEFAULT DATA
NORMAL PORT
ACTION
1) Press Transfer button and enter 207.
Display shows:
2) Dial station number. (e.g., 205)
OR
Press Volume button to select station and press Right
Soft button to move cursor.
3) Dial 1 or 0 to select port type.
(1: VMAA, 0: NORMAL)
OR
Press Volume button to select type and press Right
Soft button.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 726
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
VM/AA OPTIONS
DISPLAY
[209] VMAA PORT
NORMAL PORT
[205] VMAA PORT
NORMAL PORT
[205] VMAA PORT
VMAA PORT
2-57