Samsung OfficeServ 7000 Series Programming Manual page 322

CHAPTER 2. MMC Programming
No Option
07 INVLID MSG
08 NO ANS MSG
09 XFER MSG
10 BUSY MSG
11 NO STN MSG
12 NO ACT MSG
13 CAMP ON
14 ANS DELAY
15 RETRY CNT
16 TRANS TABLE
17 BUSY DEST
18 NO ANS DEST
19 NO ACT DEST
20 INVLID DEST
MMC [733]
This option may not be available in certain OfficeServ models.
2-284
Determines what message will play if the caller dials invalid digits
repeatedly until the retry counter expires. Invalid digits are digits not
contained in the translation table for this plan. The invalid message will
repeat for the value contained in the retry counter.
Determines what message will play if the caller is recalled to the AA port
because of a no answer.
Determines what message will play if the caller is transferred.
Determines what message will play if the caller selects a busy station.
Determines what message will play if the caller dials an invalid
extension (not installed). This retry message will repeat for the value
contained in the retry counter. See Retry Count.
Determines what message will play if the caller does not act.
Determines if calls will be transferred to busy stations. Calls transferred
to busy stations will be camped-on. The default value is OFF.
Sets how many rings will occur before this plan answers a call. The
default value is 01 second.
Determines how many selection errors a caller may make before being
transferred to the invalid digits destination. In case of no action, will not
follow this option.
Determines what translation table this plan will use. (see MMC 732 AA
TRANSLATION TABLE) The default value is same number of plan
number.
Determines the destination for the call if the selected destination is
busy. This can be another station, station group or plan. Plans are
entered by pressing A button plus two digits 01-12.
Determines the destination for the call if the selected destination does
not answer. This can be another station, station group or plan. Plans
are entered by pressing A button plus two digits 01-12.
Determines the destination for the call if the caller makes no response
(this is also the destination for rotary dial callers).
This can be another station, station group or plan. Plans are entered by
pressing A button plus two digits 01-12.
Determines the destination for the call if the caller dials invalid digits
after the retry counter has expired. This destination can be another
station, station group or plan. Plans are entered by pressing A button
plus two digits 01-12.
Description
© SAMSUNG Electronics Co., Ltd.
(Continued)